Thursday, November 24, 2011

Hi-Fi Audio Amplifiers with TL072 Preamp Circuit

The amplifier is very easy to get on the board, and an innovative tone defeat. Instead of completely disabling the sound system, the massive de-sensitized, and they defeated a maximum range. This can be increased if desired, you can have two tone controls, the lifting of 10 dB and a cut and the other with a little help and very subtle 3dB cut - it is quite (surprisingly) a very small adjustment to how you need for day-to-day hearing.

Otherwise, the design is fairly standard, with a great advantage over other models that require virtually no cable. Download the source you want - I suggest you put a switch on the back of the cabinet, and an extension of the tree with the tree in front. This leads to a minimum of wiring and reduces the crosstalk from other active inputs.

Description of the circuit

The input stage is shown with a gain of 2 times (-6 dB), configure, and also acts as a buffer for the tone control. The tone control is a basic form Baxandall, but the addition of R117, 118 and 119 provides the flexibility and ease of reconfiguration, which is the traditional layout.

I have not seen before, this technique is used). As it is 100k, which limits the number of tonal control at a reasonable price + /-10dB. To increase further in section, R119 (R219 and receive) can be omitted. Conversely, reducing the value of a small area is also about 6 dB at 20 Hz and 20 kHz with 7.5dB at 22K.

Audio system (and overall) performance is shown in Figure 2 (in increments of 10% of the pot), and it seems that the midrange is not affected. This is contrary to most of the drawings, in which the control is aligned to 1 kHz, and is very audible in the media. For those who want to use the tone controls, I would suggest that both, with no tone controls are designed and in harmony with reality, minimalist design.

5 comments:

Rod E said...

This is stolen material! Reproduction is not authorised !

mohan karthik said...
This comment has been removed by the author.
mohan karthik said...

simply coping from...Elliott Sound Products..Rod Elliott is respectable person.he publish his own schematics clear explanation with output simulations.more schematics got to Elliott Sound Products.http://sound.whsites.net

BABOOL said...

Really this is a stolen project of ESP!!! Shame!

marco said...

dice qualcuno che e rubato! ,se fosse ha fatto bene!