Showing posts with label Audio Aplication. Show all posts
Showing posts with label Audio Aplication. Show all posts

Thursday, March 15, 2012

3 Channel Audio Splitter


The schematic plans of 3 channel sound splitter firm routine which designed using op-amp IC TL084. The 3 programs firm result submission is applicable just one TL084.

The very first phase is to capacitive combining having a p. 1.0 ~ electrolytic capacitor. The items are railways Vee Y2 or 4.5 V. This allows utilizing an personal 9V automobiles. A current obtain of 10 (1 M?/100 Kohm) is acquired in the first level, as well as the other three surfaces are linked as a oneness obtain current supporters. Every personal result level pushes separately through an firm result 50 pF capacitor towards the level of resistance of 5.1 k ohm fill. The reaction variety is smooth from 10 Hz to 30 kHz.

Friday, February 24, 2012

3D audio surround system with NJM2701

3D encompass sound brand incorporated routine, can be designed a very simple 3D dynamic encompass system

With optionally available components it can be used to test real tour for evaluation with the results acquired from routine simulator. With the Live 3D breads panel device you can instantly build a life like 3D encompass program routine picture

Wireless Digital Audio Streaming

2.4 GHz sound ICs that change uncompressed CD-quality wifi sound over a organization RF (radio frequency) website weblink, with mistake-free, lossless indication. The alternatives targeted customer, mobile and high-end sound applications, such as wifi headphones, headphones and sound audio audio speakers.
 
CC85xx key benefits:
  1.     Uncompressed CD-quality wifi audio
  2.     Stone highly effective 16-bit 44.1/48kHz RF link
  3.     Multichannel and multipoint capabilities: managing of up to four many channels
  4.     USB support 


The CC8520 (two-channel) and CC8530 (four-channel) system-on-chips (SoC) are complete incorporated alternatives with RF method, microcontroller, sound codec build assistance, program styles and free PurePath Configurator PC program. In addition, the CC8521 and CC8531 SoCs contain USB sound assistance for all significant techniques.

TI’s PurePath Wifi wireless headset referrals style is the market’s most cost-effective style for top quality earphones and earphones. The style has a low automated bill-of-material price and defines a 22-hour life on a 465 mAh power supply – a 100 percent increase as when in comparison to currently available earphones.

The PurePath Wifi CC8521 and CC8531 USB dongle referrals style allow designers to style low-cost, small USB dongles for wireless sound programs, without value progression or in-depth comprehension of USB methods.

Tuesday, September 27, 2011

Audio Processor Circuit for Electronic Music Applications

This tour offers an audio processor IC SSM2045, specially designed for use in electronic music and the operational amplifier IC developed circuit 741 is configured as a low pass filter with a DC control voltage to win. The input signal is at a level of work set by the resistor R1 150mVpp.

How does the audio processor. The filter has two output buffers: output pin 2-1 pin and 4-pin 8-pin output. Internally, the outputs of two voltage-controlled amplifier (VCA) is connected.

R15 and R16 are connected to these outputs to obtain a change in the optimal control and eliminate tensions.

P4 is a volume control. Power to pin 15 and 16 shall not exceed a maximum of 250 uA. Balance between the two VCA, and the filter is either a full voltage range -250 mV + 250 mV in 14-pin control.

This tension can be adjusted P2.

Input can be controlled from up to 200 Ω source impedance. When the input level is 0 dBm, the VAC decreases by 6 dB. Bias current required to pin 17 is 120-185 Pa Pa. The cutoff frequency of 20 Hz to 20 kHz can be transferred to a variable voltage pin 5 This can be changed P1. Capacitance values ​​were chosen to spread the characteristics of the Butterworth filter.

The output current of the SSM2045 IC is converted into an output voltage of amplifier 741 All circuits must be disconnected from the DC sybsequent IC2. Voltage noise ration over 80 dB.

Thursday, August 25, 2011

Mosquito Repeller

Description: The following diagram shows the electronic mosquito repellent. Features: The piezoelectric buzzer converts the amplifier output of ultrasound can be heard by the insects, an amplifier consisting of four transistors, mosquitoes can be postponed by the use of frequencies in the ultrasonic (above 20 kHz ) wide transistor to amplify the sound. Component: IC, transistor, resistor, President, condenser